User`s manual

Operating Basics
4-38 User’s Manual
O
PERATING
B
ASICS
Wireless communication Indicator
The wireless communication indicator indicates the status of the wireless com-
munication functions.
If you used the Task Bar to disable Wireless LAN, restart the computer or follow
the procedures below to enable the system to recognize Wireless LAN. Click
Start, open Control Panel, click System and Maintenance, click System, click
Device Manager, double-click Network Adapters, and rightclick the wireless
device then choose Enable.
It may not be possible to make a network connection to a specified network name
using the ad hoc network function.
If this occurs, the new network(*) will have to be configured for all computers
connected to the same network in order to re-enable network connections.
* Please be sure to use new network name.
LAN
The computer has built-in support for Ethernet LAN (10 megabits per second,
10BASE-T) or Fast Ethernet LAN (100 megabits per second, 100BASE-TX).
This section describes how to connect/disconnect to a LAN.
CAUTION: Do not install or remove an optional memory module
while Wake-up on LAN is enabled.
Note: The Wake-up on LAN function consumes power even when the
system is off. Leave the AC adaptor connected while using this fea-
ture.
Indicator status Indication
Indicator off Wireless communication switch is set to off.
Automatic power down because of overheating.
Power malfunction
Indicator glows Wireless communication switch is on.
Wireless LAN or Bluetooth is turned on by an appli-
cation.