User`s manual

User’s Manual 7-5

HW Setup and Passwords

HW S

ETUP

AND

ASSWORDS

If there are only 2 HDDs, the Boot Priority Options setting will be like the fol-

lowing.

You can override the settings and manually select a boot device by pressing one

of the following keys while the computer is booting:

This procedure does not affect the settings.

* In this computer, CD-ROM refers to the DVD-ROM, CD-R/RW or CD-RW/

DVD-ROM drives.

Note: PC card HDD boot is not supported.

To change the boot drive, follow the steps below.

1. Hold down F12 and boot the computer.

2. Use the up/down cursor keys to select boot device you want and press

Enter.

NOTES: 1. If a supervisor password is set, the menu above does not

appear when you use the user password to start the computer.

2. The selection method above does not change the boot priority

settings in HW Setup.

U Selects the USB diskette drive.

N Selects the Network.

1 Selects the primary HDD.

2 Selects the secondary HDD.

C Selects the CD-ROM*.