User`s manual

HW Setup and Passwords
7-6 User’s Manual
HW S
ETUP
AND
P
ASSWORDS
3. If you press a key other than one of those above or if the
selected device is not installed, the system will boot accord-
ing to the current setting in HW Setup.
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in sleep mode, you can turn on
the computer by pressing any key. It is effective only for the internal keyboard
and only when the computer is in sleep mode.
USB
Legacy USB Support
Use this option to enable or disable USB Legacy Emulation. If your operating
system does not support USB, you can still use a USB mouse and keyboard by
setting the
USB Legacy Emulation item to Enabled .
LAN
Wake-up on LAN
This features lets the computer’s power be turned on when it receives a wake-up
signal from the LAN.
CAUTION: Do not install or remove an optional memory module
while Wake-up on LAN is enabled.
Note: Wake-up on LAN does not work without the AC adaptor. Leave
it connected, if you are using this feature.
Built-in LAN
Enabled Enables Wake-up on Keyboard.
Disabled Disables Wake-up on Keyboard. (Default)
Enabled Enables the USB Legacy Emulation. (Default)
Disabled Disables the USB Legacy Emulation.
Enabled Enables Wake-up on LAN.
Disabled Wake-up on LAN. (Default)
Enabled Enables built-in LAN functions. (Default)
Disabled Disables built-in LAN functions.