User`s manual

The Grand Tour
2-4 User’s Manual
T
HE
G
RAND
T
OUR
Note: When multiple IEEE1394 devices are connected to a PC, the
devices may not correctly be identified. This problem may occur
when Windows Vista™ is restarted while the devices are connected
or when the power to the IEEE1394 devices is turned on before the
PC is turned on. If it occurs, disconnect the IEEE1394 cables and
then reconnect them.
CAUTION: Keep foreign objects out of the USB connectors. A pin
or similar object can damage the computer’s circuitry.
Note: Operation of all functions of all USB devices has not been
confirmed. some functions might not execute properly.
Right side
Figure 2-3 shows the computer’s right side.
*The availability of Modem Jack is depending on the model you purchased.
Figure 2-3 The right side of the computer
CAUTION: Keep foreign objects out of the USB connectors. A pin
or similar object can damage the computer’s circuitry.
Express Card The computer provides Express Card slot on its left
side, which allows you to install an additional Express
card. (Depending on the model you purchased)
PC Card Slot The PC card slot can accommodate one 5 mm PC card
(Type II). The slot supports 16-bit PC card and 32-bit
CardBus PC card.
(Depending on the model you purchased)
Universal Serial
Bus Ports
The two Universal Serial Bus (USB) ports comply with
USB Serial 2.0 standards, which enables data transfer
speeds 40 times faster than the USB 1.1 standards. (The
ports also support USB 1.1)
OPTICAL MEDIA DRIVE
USB PORTS
*MODEM JACK
SECURITY LOCK SLOT
DC IN 19V