User Manual

Keyboard Arp & Drum Pad Owner’s Manual 7
1 Pad
Tap any Pad to transmit the assigned MIDI note messages. You can assign up to five
MIDI notes to a single Pad, and if desired you can assign the control function of the
Step Sequencer. To make detailed settings, use the Pad Edit window.
2 Pad Set
Indicates the current Pad Set, which includes the settings regarding what notes are
assigned to each of the sixteen Drum Pads. Tapping [+]/[-] changes the Pad Set in
single steps. Or to change the Pad Set, tap the Pad Set name indicator to call up the
Pad Type list, then tap the desired one.
3 EDIT, LEARN
To edit the settings for each Pad:
1) Tap [EDIT].
2) Tap the desired Pad to call up the Pad Edit window and the on-screen keyboard.
3) Make the settings including the note assignment as described below.
You can set the desired Note and Velocity also by tapping [LEARN] then pressing
the key on the actual keyboard of the connected synthesizer.
4 Slider
When “PITCH” (as the Pitch Bend wheel), “ASSIGN1,” or “ASSIGN2” is selected,
controlling the slider will transmit the MIDI value according to your finger position.
The Utility window lets you assign the desired MIDI messages to “ASSIGN1” and
“ASSSIGN2” individually.
When “VELOCITY” is selected, holding the slider will set the velocity with which the
MIDI note messages of the Pad are transmitted.
When “ROLL LENGTH” is selected, controlling the slider will modify the length of the
ROLL according to your finger position.
5 LATCH
When this button is switched to blue by tapping, simply tap the Roll Note button to
hold it.
6 Roll Note buttons
Determines the note length of the roll produced by touching the Pad while holding
a Roll Note button.
7 Roll indicator
The information of the ROLL is shown while holding the Roll Note button.
Pinching in and out horizontally adjusts the Gate Time of all the notes. Dragging
each bar vertically adjusts the Velocity.
Velocity
Gate Time