User Manual

Faders & XY Pad Owner’s Manual 5
One of the Mixer Control displays. This lets you control the specified faders simultaneously by dragging on the XY Pad area.
XY Pad display
Upper Outlet
Left Outlet
Tapping this will change the screen to the Faders
display.
Shows the current operated position on the Pad.
Right Outlet
Lower Outlet
Inlets
XY Pad
Sets the sensitivity of the red ball in the XY Pad area.
Move the slider rightward to raise the sensitivity.
Preparation before operating
Each Fader Inlet must be connected to connect one of
the Outlets. To do this, touch the desired Outlet to call up
the cable then drag the cable to the desired Fader Inlet.
Only the Faders connected to an Outlet can be controlled
on the XY Pad display. To disconnect the cable, flick the
Inlet. Note that only one Outlet can be connected to each
Inlet.
Fader behavior
––
––
–
–
––
Outlet connected to the Fader Inlet
Dragging direction
Left OutletRight OutletLower OutletUpper Outlet
Dragging
upward
Dragging
downward
Dragging
rightward
Dragging
leftward
Moves the Fader
upward.
Moves the Fader
downward.
Moves the Fader
downward.
Moves the Fader
upward.
Moves the Fader
upward.
Moves the Fader
downward.
Moves the Fader
downward.
Moves the Fader
upward.
U.R.G., Digital Musical Instruments Division
© 2011 Yamaha Corporation
106MW-B0