User Manual

Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode
Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
System Settings (Utility mode, etc.)
MOTIF XF Reference Manual
226
Audio Input Settings in the Voice
mode—[F4] VoiceAudio
You can set parameters related to audio input signal from
the [A/D INPUT] connector and the IEEE1394 connector in
the Voice mode. This display is available only when
entering the Utility mode from the Voice mode.
n The FW settings (FW1 – 14) are available only when the
optional FW16E is installed.
From this display you can set various parameters of the
Audio Input signal in the Voice mode, such as Output
jacks, Volume, Pan, and Effect depth. This display is
available only when entering the Utility mode from the Voice
mode.
1 Volume
Determines the output level of the Audio Input Part.
Settings: 0 – 127
2 Pan
Determines the stereo pan position of the Audio Input Part.
Settings: L63 (far left) – C (center) – R63 (far right)
3 Mono/Stereo
Determines the signal configuration for the Audio Input Part,
or how the signal or signals are routed (stereo or mono).
Settings: stereo, L mono, R mono, L+R mono
stereo
Both the L and R channels of the audio input are used.
L mono
Only the L channel of the audio input is used.
R mono
Only the R channel of the audio input is used.
L+R mono
The L and R channels of the audio input are mixed and processed in
mono.
4 Output Select
Determines the output jack assignment for the Audio Input
Part.
Settings: See the table below.
n You can call up the list and select the desired item by pressing
the [SF6] LIST button. For details, see page 37.
5 Reverb Send
Determines the Send level of the Audio Input Part signal
sent to the Reverb effect. The higher the value, the more
pronounced the Reverb.
Settings: 0 – 127
6 Chorus Send
Determines the Send level of the Audio Input Part signal
sent to the Chorus effect. The higher the value, the more
pronounced the Chorus.
Settings: 0 – 127
7 Dry Level
Determines the level of the Audio Input Part which has not
been processed with the System Effects (Reverb, Chorus).
The higher the value, the less pronounced the Reverb and
Chorus.
Settings: 0 – 127
n The Reverb Send (5), Chorus Send (6), and Dry Level (7)
parameters are not available when Output Select (4) is set to
the value other than “L&R.”
Output Settings—[SF1] Output
1
2
3
5
7
4
6
LCD Output jacks Stereo/Mono
L&R OUTPUT L and R Stereo
asL&R ASSIGNABLE OUTPUT L and R Stereo
FW1&2 FW OUTPUT 1 and 2 Stereo (1: L, 2: R)
FW3&4 FW OUTPUT 3 and 4 Stereo (3: L, 4: R)
FW5&6 FW OUTPUT 5 and 6 Stereo (5: L, 6: R)
FW7&8 FW OUTPUT 7 and 8 Stereo (7: L, 8: R)
FW9&10 FW OUTPUT 9 and 10 Stereo (9: L, 10: R)
FW11&12 FW OUTPUT 11 and 12 Stereo (11: L, 12: R)
FW13&14 FW OUTPUT 13 and 14 Stereo (13: L, 14: R)
asL ASSIGNABLE OUTPUT L Mono
asR ASSIGNABLE OUTPUT R Mono
FW1 FW OUTPUT 1 Mono
:: :
FW14 FW OUTPUT 14 Mono
ins L
(A/D Input
only)
Internal Vocoder module Mono