User Manual

MOTIF XF Data List
103
Effect Parameter List
[2] HARMONIC ENHANCER
[3] Talking Modulator
[4] DAMPER RESONANCE
[5] PITCH CHANGE
[6] EARLY REFLECTION
Insertion L Block
[0] THRU
When this type is selected, no parameters are available.
[1] VOCODER
Master Effect Block
THRU type is not included in the Master Effect Block. If you wish to bypass this block, turn
the [MASTER EFFECT] off.
DELAY L, R (Stereo)
LO-FI
COMP DISTORTION
ISOLATOR
DYNAMIC FILTER
SLICE
RING MODULATOR
MULTI BAND COMP
VCM COMPRESSOR 376
No. Parameter Range Value Table No.
1 HPF Cutoff Frequency 500Hz – 16.0kHz (28 – 58) 3
2 Overdrive 0 – 127 (0 – 127)
3 Mix Level 0 – 127 (0 – 127)
4—
5—
6—
7—
8—
9—
10 —
11 —
12 —
13 —
14 —
15 —
16 —
No. Parameter Range Value Table No.
1 Vowel a/i/u/e/o (0 – 4)
2 Move Speed 1 – 62 (1 – 62)
3 Overdrive 0 – 127 (0 – 127)
4 Output Level 0 – 127 (0 – 127)
5—
6—
7—
8—
9—
10 —
11 —
12 —
13 —
14 —
15 —
16 —
No. Parameter Range Value Table No.
1 HPF Cutoff Frequency 20Hz – 8.0kHz (0 – 52) 3
2 LPF Cutoff Frequency 1.0kHz – 20.0kHz (34 – 60) 3
3 EQ Low Frequency 32Hz – 2.0kHz (4 – 40) 3
4 EQ Low Gain -12 – +12dB (52 – 76)
5 Hi Resonance 0.1 – 1.0 (1 – 10)
6 Pedal Response slow/normal/fast (0 – 2)
7—
8—
9—
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 —
12 —
13 —
14 —
15 —
16 Damper Control 0 – 127 (0 – 127)
No. Parameter Range Value Table No.
1 Pitch 1 -24 – +24 (40 – 88)
2 Fine 1 -50 – +50 (14 – 114)
3 Initial Delay 1 0.1ms – 400.0ms (0 – 127) 7
4 Feedback Level 1 -63 – +63 (1 – 127)
5 Pitch 2 -24 – +24 (40 – 88)
6 Fine 2 -50 – +50 (14 – 114)
7 Initial Delay 2 0.1ms – 400.0ms (0 – 127) 7
8 Feedback Level 2 -63 – +63 (1 – 127)
9—
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 Pan 1 L63 – C – R63 (1 – 127)
12 Output Level 1 0 – 127 (0 – 127)
13 Pan 2 L63 – C – R63 (1 – 127)
14 Output Level 2 0 – 127 (0 – 127)
15 —
16 —
No. Parameter Range Value Table No.
1 Type S-hall, L-hall, random,
reverse, plate, spring
(0 – 5)
2 Room Size 0.1 – 20.0 (0 – 127) 6
3 Diffusion 0 – 10 (0 – 10)
4 Initial Delay 0.1ms – 200.0ms (0 – 127) 5
5 Feedback Level -63 – +63 (1 – 127)
6 HPF Cutoff Frequency 20Hz – 8.0kHz (0 – 52) 3
7 LPF Cutoff Frequency 1.0kHz – 20.0kHz (34 – 60) 3
8—
9—
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 Liveness 0 – 10 (0 – 10)
12 Density 0 – 3 (0 – 3)
13 Feedback High Damp 0.1 – 1.0 (1 – 10)
14 —
15 —
16 —
No. Parameter Range Value Table No.
1 Formant Shift -2, -1, 0, +1, +2 (62 – 66)
2 Formant Offset -63 – +63 (1 – 127)
3 Vocoder Attack 1ms – 200ms (0 – 29)
4 Vocoder Release 10ms – 3000ms (0 – 23)
5 Gate Switch off/on (0 – 1)
6 Mic Gate Threshold -72dB – -30dB (55 – 97)
7 HPF Cutoff Frequency Thru, 500Hz – 16.0kHz (27 – 58)
8 HPF Output Level 0 – 127 (0 – 127)
9—
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 Mic Level 0 – 127 (0 – 127)
12 Inst Input Level 0 – 127 (0 – 127)
13 Noise Input Level 0 – 127 (0 – 127)
14 Output Level 0 – 127 (0 – 127)
15 BPF1 Gain -18dB – +18dB (46 – 82)
16 BPF2 Gain -18dB – +18dB (46 – 82)
17 BPF3 Gain -18dB – +18dB (46 – 82)
18 BPF4 Gain -18dB – +18dB (46 – 82)
19 BPF5 Gain -18dB – +18dB (46 – 82)
20 BPF6 Gain -18dB – +18dB (46 – 82)
21 BPF7 Gain -18dB – +18dB (46 – 82)
22 BPF8 Gain -18dB – +18dB (46 – 82)
23 BPF9 Gain -18dB – +18dB (46 – 82)
24 BPF10 Gain -18dB – +18dB (46 – 82)