User Manual

MOTIF XF Data List
156
Remote Control Assignments
 SndVal mode (for Audio track)
[SF1] Sends (or [F1] I/O  Knob 2  [ENTER])
 SndPan mode (for Audio track)
[F1] I/O  Knob 3  [ENTER]
 SndOut mode
[F1] I/O  Knob 4  [ENTER]
 EFFECT mode
[SF2] Plug-ins (or [F1] I/O  Knob 7  [ENTER])
 EDIT mode
 Prefs mode
[F1] I/O  Knob 8  [ENTER]
Fader Banks page
TR Group page
Dialog page
Buttons/Knobs Functions
Knobs 1 – 8 For editing the Send value of the
selected bus.
Cursor buttons [L]/[M] Changes the Send number (bus).
[ENTER] (with the cursor on any
channel.)
Mutes or unmutes the selected bus.
[SF3] + [ENTER] (with the cursor
on any channel.)
Resets the Send value of the selected
bus to the default.
Call up the Fader Banks page,
then press the [SF1] Flip
Exchanges the functions between the
Channel Knobs and the Faders.
[SF1] Sends in the SndVal mode Alternately hides/shows the Level
Meter.
Buttons/Knobs Functions
Knobs 1 – 8 For editing the Pan of the selected
bus.
Cursor buttons [L]/[M] Changes the Send number (bus).
[ENTER] (with the cursor on any
channel.)
Mutes or unmutes the selected bus.
[SF3] + [ENTER] (with the cursor
on any channe.l)
Resets the Send value of the selected
bus to the default.
Call up the Fader Banks page,
then press the [SF1] Flip
Exchanges the functions between the
Channel Knobs and the Faders.
Buttons/Knobs Functions
Cursor buttons [L]/[M] Changes the Send number (bus).
Knobs 1 – 8 Selects the selected bus destination.
[ENTER] (with the cursor on any
channel; except when selecting
a bus)
Switches between Send PRE and
POST.
Buttons/Knobs Functions
Knobs 1 – 8 Selects a Plug-in Effect for each track.
[F3] EQ + [ENTER] (with the
cursor on any channel.)
Assigns the Parametric EQ to the
corresponding track (for Audio track)
Cursor buttons [L]/[M] Changes the Effect Number (Slot).
[ENTER] (with the cursor on any
channel)
Turns the Effect Bypass on or off. When
the bus is turned on, X is indicated
above the Effect name.
[SF2] Edit + [ENTER] (from the
Fader Banks page with the
cursor on any channel; when any
track is selected on the DAW)
Enters the Plug-in Effect Edit mode.
(Available only when the Plug-in Effect
is selected.) Please keep in mind that
some parameters may not be available
depending on the selected Effect Type.
Press the [SF2] EDIT button again to
exit from the Edit mode.
Buttons/Knobs Functions
Knobs 1 – 8 For editing parameters.
Cursor buttons [L]/[M] Changes an Effect Number.
Call up the Cursor page, then
press the [SF1] E/[SF2] F
Calls up the Effect of a different track.
Call up the Fader Banks page,
then press the [F1] E Channel/
[F2] Channel F
Changes the parameters to be edited
with the Knobs in order one by one.
[F4] E Bank
[F5] Bank F
Changes the parameters to be edited
with the Knobs in groups of eight.
Call up the Fader Banks page,
then press the [SF1] Flip
Exchanges the functions between the
Channel Knobs and the Faders.
Buttons/Knobs Functions
Knobs 1 – 3 Selects the parameter to be edited.
[ENTER] (with the cursor on
channel 1 – 3.)
Changes the value of a selected
parameter.
Flip Edit Lvl Meters Dial Page List
E Channel Channel F – E Bank Bank F Shift
Buttons Functions
[F1] E Channel
[F2] Channel F
Scrolls through the track indication channel-
by-channel.
[F4] E Bank
[F5] Bank F
Scrolls through the track indication on the LCD
of the MOTIF XF every eight channels.
[SF1] Flip Exchanges the functions between the Channel
Knobs and the Faders.
[SF3] Lvl Meters Alternately hides/shows the Level Meter.
SEQ Editor TR View Mix Board Dial Page List
Group Ungroup Suspend E Bank Bank F Shift
Buttons Functions
[F1] Group Groups multiple tracks.
[F4] E Bank
[F5] Bank F
Scrolls through the track indication on the LCD
of the MOTIF XF every eight channels.
[SF2] TR View Brings the Track Overview to front.
[SF3] Mix Board Starts the Mixer window.
[SF1] SEQ Editor Starts the Sequencer Editor window, or
displays it to front.
[F6] Shift + [SF1] SEQ
Editor
Starts the Soundbites window.
Overdub Ptch Thru Clear Clip Dial Page List
Enter Escape Click Count Off – Shift
Buttons Functions
[F3] Click Turns Click on or off.
[F4] Count Off Turns Countdown for recording/playback on or
off.
[SF1] Overdub Turns Overdub recording on or off.
[SF3] Clear Clip Clears the clipping indicator in the level meter.
Buttons/Knobs Functions