User Manual

MOTIF XF Data List
95
* OS V1.50 or later
Effect Parameter List
Reverb Block
[0] No Effect
When this type is selected, no parameters are available.
[1] REV-X HALL
[4] REV-X ROOM
REV-X HALL: (Table No.25)
REV-X ROOM: (Table No.26)
For details, refer to the Effect Data Assign Table.
[2] R3 HALL
[3] SPX HALL
[5] R3 ROOM
[6] SPX ROOM
[7] R3 PLATE
[8] SPX STAGE
[9] SPACE SIMULATOR
[10] HD HALL*
[11] HD ROOM*
[12] HD PLATE*
Chorus, Insertion Block
[0] THRU/No Effect
When this type is selected, no parameters are available.
Category — REVERB
[1] SPX HALL
[2] SPX ROOM
[3] SPX STAGE
No. Parameter Range Value Table No.
1 Reverb Time 0.3s – 18.0s (HALL)/
10.0s (ROOM)
(0 – 69) 25/26
2 Diffusion 0 – 10 (0 – 10)
3 Initial Delay 0.1ms – 200.0ms (0 – 127) 5
4 HPF Cutoff Frequency 20Hz – 8.0kHz (0 – 52) 3
5 LPF Cutoff Frequency 1.0kHz – 20.0kHz (34 – 60) 3
6 Room Size 0 – 31 (0 – 31)
7 High Ratio 0.1 – 1.0 (1 – 10)
8 Low Ratio 0.1 – 1.4 (1 – 14)
9 Decay 0 – 63 (0 – 63)
10 —
11 —
12 —
13 —
14 —
15 —
16 —
No. Parameter Range Value Table No.
1 Reverb Time 0.3s – 30.0s (0 – 69) 4
2 Diffusion 0 – 10 (0 – 10)
3 Initial Delay 0.1ms – 200.0ms (0 – 127) 5
4 HPF Cutoff Frequency 20Hz – 8.0kHz (0 – 52) 3
5 LPF Cutoff Frequency 1.0kHz – 20.0kHz (34 – 60) 3
6—
7—
8—
9—
10 —
11 Reverb Delay 0.1ms – 200.0ms (0 – 127) 5
12 Density 0 – 4 (0 – 4)
13 ER/Rev Balance E63>R – E=R – E<R63 (1 – 127)
14 Feedback High Damp 0.1 – 1.0 (1 – 10)
15 Feedback Level -63 – +63 (1 – 127)
16 —
No. Parameter Range Value Table No.
1 Reverb Time 0.3s – 30.0s (0 – 69) 4
2 Diffusion 0 – 10 (0 – 10)
3 Initial Delay 0.1ms – 200.0ms (0 – 127) 5
4 HPF Cutoff Frequency 20Hz – 8.0kHz (0 – 52) 3
5 LPF Cutoff Frequency 1.0kHz – 20.0kHz (34 – 60) 3
6 Width 0.5m – 30.2m (0 – 104) 11
7 Height 0.5m – 30.2m (0 – 104) 11
8 Depth 0.5m – 30.2m (0 – 104) 11
9 Wall Vary 0 – 30 (0 – 30)
10 —
11 Reverb Delay 0.1ms – 200.0ms (0 – 127) 5
12 Density 0 – 4 (0 – 4)
13 ER/Rev Balance E63>R – E=R – E<R63 (1 – 127)
14 Feedback High Damp 0.1 – 1.0 (1 – 10)
15 Feedback Level -63 – +63 (1 – 127)
16 Space Type 0 – 1 (0 – 1)
No. Parameter Range Value Table No
1 Reverb Time 0.3s – 30.0s (0 – 69) 4
2 Room Size 0 – 4 (0 – 4)
3 Initial Delay 0.1ms – 200.0ms (0 – 127) 5
4 High Damp Frequency 1.0kHz – 20.0kHz (34 – 60) 3
5—
6 High Ratio
0.0 – 1.0 (0 – 10)
7—
8—
9—
10 —
11 —
12 —
13 EQ Low Frequency
22Hz – 1.0kHz (1 – 34) 3
14 EQ Low Gain
-12dB – 0dB – +12dB (52 – 76)
15 EQ High Frequency
500Hz – 18.0kHz (28 – 59) 3
16 EQ High Gain
-12dB – 0dB – +12dB (52 – 76)
No. Parameter Range Value Table No
1 Reverb Time 0.3s – 30.0s (0 – 69) 4
2 Plate Type 0 – 2 (0 – 2)
3 Initial Delay 0.1ms – 200.0ms (0 – 127) 5
4 High Damp Frequency 1.0kHz – 20.0kHz (34 – 60) 3
5—
6 High Ratio 0.0 – 1.0 (0 – 10)
7—
8—
9—
10 —
11 —
12 —
13 EQ Low Frequency 22Hz – 1.0kHz (1 – 34) 3
14 EQ Low Gain -12dB – 0dB – +12dB (52 – 76)
15 EQ High Frequency 500Hz – 18.0kHz (28 – 59) 3
16 EQ High Gain -12dB – 0dB – +12dB (52 – 76)
No. Parameter Range Value Table No.
1 Reverb Time 0.3s – 30.0s (0 – 69) 4
2 Diffusion 0 – 10 (0 – 10)
3 Initial Delay 0.1ms – 99.3ms (0 – 63) 5
4 HPF Cutoff Frequency 20Hz – 8.0kHz (0 – 52) 3
5 LPF Cutoff Frequency 1.0kHz – 20.0kHz (34 – 60) 3
6—
7—
8—
9—
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 Reverb Delay 0.1ms – 99.3ms (0 – 63) 5
12 Density 0 – 4 (0 – 4)
13 ER/Rev Balance E63>R – E=R – E<R63 (1 – 127)
14 Feedback High Damp 0.1 – 1.0 (1 – 10)
15 Feedback Level -63 – +63 (1 – 127)
16 —