User Manual

MOTIF XF Data List
97
Effect Parameter List
[2] 2 MODULATOR
[3] SPX CHORUS
[4] SYMPHONIC
[5] ENSEMBLE DETUNE
Category — FLANGER
[1] VCM FLANGER
[2] CLASSIC FLANGER
[3] TEMPO FLANGER
[4] DYNAMIC FLANGER
No. Parameter Range Value Table No.
1 LFO Speed 0.0Hz – 39.70Hz (0 – 127) 1
2 AM Depth 0 – 127 (0 – 127)
3 PM Depth 0 – 127 (0 – 127)
4 Feedback Level -63 – +63 (1 – 127)
5 Delay Offset 0.0ms – 50.0ms (0 – 127) 2
6 – 9: Same as the parameters shaded in gray in CROSS DELAY on page 96.
10 Dry / Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 EQ Mid Frequency 100Hz – 10.0kHz (14 – 54) 3
12 EQ Mid Gain -12dB – +12dB (52 – 76)
13 EQ Mid Width 0.1 – 12.0 (1 – 120)
14 —
15 Input Mode mono, stereo (0 – 1)
16 —
No. Parameter Range Value Table No.
1 LFO Speed 0.0Hz – 39.70Hz (0 – 127) 1
2 LFO Depth 0 – 127 (0 – 127)
3 Feedback Level -63 – +63 (1 – 127)
4 Delay Offset 0.0ms – 50.0ms (0 – 127) 2
5—
6 – 9: Same as the parameters shaded in gray in CROSS DELAY on page 96.
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 EQ Mid Frequency 100Hz – 10.0kHz (14 – 54) 3
12 EQ Mid Gain -12dB – +12dB (52 – 76)
13 EQ Mid Width 0.1 – 12.0 (1 – 120)
14 —
15 Input Mode mono, stereo (0 – 1)
16 —
No. Parameter Range Value Table No.
1 LFO Speed 0.0Hz – 39.70Hz (0 – 127) 1
2 LFO Depth 0 – 127 (0 – 127)
3 Delay Offset 0.0ms – 50.0ms (0 – 127) 2
4—
5—
6 – 9: Same as the parameters shaded in gray in CROSS DELAY on page 96.
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 EQ Mid Frequency 100Hz – 10.0kHz (14 – 54) 3
12 EQ Mid Gain -12dB – +12dB (52 – 76)
13 EQ Mid Width 0.1 – 12.0 (1 – 120)
14 —
15 —
16 —
No. Parameter Range Value Table No.
1 Detune -50cent – +50cent (14 – 114)
2 Initial Delay Lch 0.0ms – 50.0ms (0 – 127) 2
3 Initial Delay Rch 0.0ms – 50.0ms (0 – 127) 2
4 Spread 0 – 63 (0 – 63)
5—
6—
7—
8—
9—
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 – 14: Same as the parameters shaded in gray in CROSS DELAY on page 96.
15 —
16 —
No. Parameter Range Value Table No.
1 Speed 0.040Hz – 10.00Hz (0 – 235) 22
2 Manual 0 – 127 (0 – 127)
3 Depth 0 – 127 (0 – 127)
4 Feedback 0 – 127 (0 – 127)
5 Type 1 – 3 (0 – 2)
6 Spread 0 – 127 (0 – 127)
7 Mix 0 – 127 (0 – 127)
8—
9—
10 —
11 —
12 —
13 —
14 —
15 —
16 —
No. Parameter Range Value Table No.
1 LFO Speed 0.0Hz – 39.70Hz (0 – 127) 1
2 LFO Depth 0 – 127 (0 – 127)
3 LFO Wave Triangle, Sine, Random (0 – 2)
4 Delay Offset 0.09 – 36.21ms (0 – 139) 20
5 Feedback Level -100 – +100% (0 – 200)
6 – 9: Same as the parameters shaded in gray in CROSS DELAY on page 96.
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 EQ Mid Frequency 100Hz – 10.0kHz (14 – 54) 3
12 EQ Mid Gain -12dB – +12dB (52 – 76)
13 EQ Mid Width 0.1 – 12.0 (1 – 120)
14 Modulation Phase -180 – +180 (0 – 16) 21
15 Feedback High Damp 0.1 – 1.0 (1 – 10)
16 Analog Feel 0 – 10 (0 – 10)
No. Parameter Range Value Table No.
1 LFO Speed 16th – 4thx16 (5 – 29) 14
2 LFO Depth 0 – 127 (0 – 127)
3 Feedback Level -63 – +63 (1 – 127)
4 Delay Offset 0.0ms – 50.0ms (0 – 127) 2
5 LFO Phase Reset off (free run), Key On Reset,
SEQ Start Reset
(0 – 2)
6 – 9: Same as the parameters shaded in gray in CROSS DELAY on page 96.
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 EQ Mid Frequency 100Hz – 10.0kHz (14 – 54) 3
12 EQ Mid Gain -12dB – +12dB (52 – 76)
13 EQ Mid Width 0.1 – 12.0 (1 – 120)
14 LFO Phase Difference -180deg – +180deg (4 – 124)
15 —
16 —
No. Parameter Range Value Table No.
1 Sensitivity 0 – 127 (0 – 127)
2 Delay Offset 0 – 127 (0 – 127)
3 Feedback Level -63 – +63 (1 – 127)
4 Attack Time 0.3ms – 227ms (0 – 127) 17
5 Release Time 2.6ms – 2171ms (0 – 127) 18
6 Release Curve 0 – 127 (0 – 127)
7 Direction up, down (0 – 1)
8 Dyna Threshold Level 0 – 127 (0 – 127)
9 Dyna Level Offset 0 – 127 (0 – 127)
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 —
12 —
13 – 16: Same as the parameters shaded in gray in CROSS DELAY on page 96.