Service manual

FRONT WHEEL AND BRAKE
EAS00525
CHECKING THE FRONT WHEEL
1. Check:
• wheel axle
Roll the wheel axle on a flat surface.
Bends -» Replace.
Do not attempt to straighten a bent wheel
axle.
2. Check:
• tire
• front wheel
Damage/wear -» Replace.
Refer to “CHECKING THE TIRES” and
“CHECKING THE WHEELS” in chapter
3.
3. Measure:
• radial wheel runout (T)
• lateral wheel runout @
Over the specified limits -» Replace.
Radial wheel runout limit
1.0 mm (0.04 in)
Lateral wheel runout limit
1.0 mm(0.04 in)
4. Check:
• wheel bearings
Front wheel turns roughly or is loose -»
Replace the wheel bearings.
• oil seal
Damage/wear -» Replace.
5. Replace:
• wheel bearings New
• oil seal New
4-5