Service manual
FRONT WHEEL AND BRAKE
CHAS (3^3^)
•••••••••••••••••••••••
a. Clean the outside of the front wheel hub.
b. Remove the oil seal 1 with a flat-head
screwdriver.
NOTE:
To prevent damaging the wheel, place a rag 2
between the screwdriver and the wheel surface.
c. Remove the wheel bearings 4 with a
gen-
eral bearing puller3.
Install the new wheel bearings and oil seal
in the reverse order of disassembly.
•••••••••••••••••••••••
d.
EAS00535
CHECKING THE SPEEDOMETER GEAR
UNIT
1.
Check:
• speedometer clutch
Bends/damage/wear -» Replace.
2.
Check:
• speedometer drive gear (T)
• speedometer driven gear®
Damage/wear -» Replace.
4-6