Service manual

REAR WHEEL AND BRAKE
CHAS (3^3^)
EAS00567
CHECKING THE REAR WHEEL DRIVE HUB
1. Check:
• rear wheel drive hub
Cracks/damage -» Replace.
(If
/)>
^v-
~~~G77\-__
3^
12270603
EAS00569
CHECKING THE BRAKE
The following procedure applies to all of the
brake shoes.
1. Check:
• brake shoe lining
Glazed areas -» Repair.
Sand the glazed areas with course sand-
paper.
NOTE:
After sanding the glazed areas, clean the brake
shoe with a cloth.
2. Measure:
• brake shoe lining thickness a
Out of specification -» Replace.
Brake shoe lining thickness limit
(minimum)
2.0 mm(0.08 in)
w
Do not allow oil or grease to contact the
brake shoes.
NOTE:
Replace the brake shoes as a set, if either is
worn to the wear limit.
4-15