Service manual

REAR WHEEL AND BRAKE
CHAS (3^3^)
EAS00574
INSTALLING THE REAR WHEEL
1. Lubricate:
8wheel axle
Recommended lubricant
Lithium-soap-based grease
2. Install:
• rear wheel
3. Tighten:
• plate washer
• wheel axle nut©
XI 120Nm(12.0m * kg, 86.8ft* lb)
4. Install:
• muffler
Refer to”ENGINE REMOVAL”in chapter
5.
5. Adjust:
• brake lever free play
Refer to”ADJUSTING THE REAR
BRAKE” in chapter 3.
EAS00575
ADJUSTING THE REAR WHEEL STATIC
BALANCE
NOTE:
8 After replacing the tire, wheel or both, the
rear wheel static balance should be ad-
justed.
8 Adjust the rear wheel static balance with
the rear wheel drive hub installed.
1. Adjust:
8rear wheel static balance
Refer to “ADJUSTING THE FRONT
WHEEL STATIC BALANCE”.
4-18