Service manual

ENGINE REMOVAL
ENG
%m
EAS00188
ENGINE REMOVAL
LEADS, HOSES AND MUFFLER
ENGINE
rV 10Nm(1.0m • kg, 7.2 ft* lb)
rV 10Nm(1.0m • kg, 7.2 ft* lb)
Order Job/Part
Q’ty
Remarks
1
2
Removing the leads, hoses and muf-
fler
Front cover/Single seat/Trunk
Battery cover/Battery
Side cover(left and right)
Footrest board
Coolant
Rear brake cable/Adjuster/Pin
Throttle body and fuel injector
Starter motor
Conduit hose
Coolant temperature sensor coupler
1
1
Remove the parts in the order listed.
Refer to”COVER AND PANEL”in chap-
ter 3.
Drain.
Refer to”CHANGING THE COOLANT”in
chapter 3.
Refer to”REAR WHEEL AND BRAKE”in
chapter 4.
Refer to”THROTTLE BODY AND FUEL
INJECTOR”in chapter 7.
Refer to”STARTER MOTOR”in chapter
8.
Disconnect.
Disconnect.
5-1