Service manual

ENGINE REMOVAL
ENG
%
m
EAS00192
INSTALLING THE ENGINE
1. Install:
8engine1
8engine mounting bolt2
8engine mounting nut3
NOTE:
8 Apply lithium-soap-based grease to the
unthreaded portion of the engine mounting
bolt shaft.
8 Do not fully tighten the engine mounting
bolt..
2. Install:
• rear shock absorber assembly lower
bolt®
NOTE:
Do not fully tighten the bolt.
3. Tighten:
• engine mounting bolt
XI 58Nm(5.8m * kg, 42.0ft * lb)
• rear shock absorber assembly lower bolt
\| 16Nm(1.6m * kg, 11.6ft * lb)
5-4