Service manual

ManualsBrandsYamaha ManualsScootersXF50W

BELT DRIVE

ENG

%

m

%-©

1 // / /Py*—\

1

3. Remove:

8secondary sheave 1

8V-belt 2

NOTE:

Remove the V-belt and secondary sheave from

the primary sheave side.

EAS00319

DISASSEMBLING THE

SHEAVE

1.

Remove:

8clutch carrier nut 1

NOTE:

SECONDARY

Install the clutch spring holder 2 and clutch

spring holder arm 3 onto the secondary sheave

as shown.

Then,

compress the spring, and re-

move the clutch carrier nut 1.

Clutch spring holder

90890-01337

YM-33285

YM-33285-6

CHECKING THE CLUTCH SHOES

The following procedure applies to

all

of

the

clutch

shoes.

1.

Check:

• clutch shoe

Damage/wear -» Replace the clutch

shoes and springs as a set.

Glazed areas -»Sand with coarse sand-

paper.

NOTE:

After sanding the glazed areas, clean the clutch

with a cloth.

2.

Measure:

• clutch shoe thickness

Out of specification -» Replace the clutch

shoes and springs as a set.

5-45