Service manual

BELT DRIVE
ENG
# 1
1&m\
EAS00324
ASSEMBLING THE SECONDARY SHEAVE
1. Lubricate:
8secondary fixed sheave’s inner surface
1
8secondary sliding sheave’s inner surface
2
8oil seals
8bearings
(with the recommended lubricant)
Recommended lubricant
BEL-RAY assembly lube
®
2. Install:
8secondary sliding sheave 1
NOTE:
Install the secondary sliding sheave onto the
secondary fixed sheave 2 with the oil seal guide
3.
m
Oil seal guide
90890-01384 (YM-33299)
3. Install:
8guide pin 1
4. Lubricate:
8guide pin groove 2
8o-ring New 3
(with the recommended lubricant)
Recommended lubricant
BEL-RAY assembly lube
®
5-49