Service manual

STARTER CLUTCH AND AC MAGNETO
ENG
%
m
EAS00347
REMOVING THE AC MAGNETO
1. Remove:
8AC magneto rotor nut1
8washer
NOTE:
8 While holding the AC magneto rotor 2 with
the sheave holder 3, loosen the AC mag-
neto rotor nut.
8 Do not allow the sheave holder to touch the
projection on the AC magneto rotor.
Sheave holder
90890-01701
YS-01880-A
2. Remove:
8AC magneto rotor 1
(with the flywheel puller set 2)
8woodruff key
cC
To protect the end of the crankshaft, place
an appropriate sized socket between the
flywheel puller set’s center bolt and the
crankshaft.
NOTE:
Make sure the flywheel puller is centered over
the AC magneto rotor.
Flywheel puller set
90890-01468
YU-33270-B
5-56