Service manual

OIL PUMP
ENG
%m
EAS00375
ASSEMBLING THE OIL PUMP
1. Lubricate:
8inner rotor
8outer rotor
8oil pump shaft
(with the recommended lubricant)
Recommended lubricant
Engine oil
2. Install:
8 oil pump shaft (T)
(to the oil pump housing®)
8 pin (3)
8 inner rotor®
8 outer rotor©
8 oil pump housing cover®
8 oil pump housing screw
XI 4 Nm (0.4 m * kg, 2.9 ft * lb)
NOTE:
When installing the inner rotor, align the pin (3) in
the oil pump shaft with the groove a in the inner
rotor (4).
3. Check:
8 oil pump operation
Refer to “CHECKING THE OIL PUMP”.
EAS00376
INSTALLING THE OIL PUMP
1. Install:
8oil pump drive gear 1
8gasket New
8oil pump2
8oil pump bolt
\| 4 Nm (0.4 m * kg, 2.9 ft * lb)
C
After tightening the bolts, make sure the oil
pump turns smoothly.
5-63