Service manual
THROTTLE BODY AND FUEL INJECTOR
EAS00916
FI ifl
CHECKING THE ISC (IDLE SPEED
CON-
TROL) VALVE
NOTE:
Do not remove the ISC (idle speed control) valve
unit completely from the throttle body assembly.
1.
Check:
8ISC (idle speed control) valve
•••••••••••••••••••••••
a. Disconnect the ISC (idle speed control)
valve coupler from the ISC (idle speed
con-
trol) valve.
b. Connect the digital circuit tester to the
ter-
minals of the ISC (idle speed control) valve.
Positive tester probe -> pink terminal ©
Negative tester probe -> green/yellow
terminal 2
Positive tester probe -> gray terminal ®
Negative tester probe -> sky blue terminal
©
Digital circuit tester
90890-03174
c. Measure the ISC (idle speed control) valve
resistance.
Out of specification -» Replace the throttle
body.
a
ISC (idle speed control) valve resis-
tance
18 ~ 22 at 20°C(68°F)
•••••••••••••••••••••••
7-34