Service manual

IGNITION SYSTEM
• Measure the primary coil resistance.
a
Primary coil resistance
2.16 ~ 2.64 at 20°C(68°F)
• Connect the pocket tester (£1 x1k) to the ig-
nition coil as shown.
Negative tester probe g orange 2
Positive tester probe g spark plug lead 1
• Measure the secondary coil resistance.
m
Secondary coil resistance
8.64 ~ 12.96 k at 20°C(68°F)
• Is the ignition coil OK?
4
YES
4
NO
Replace the ignition coil.
EAS00748
7. Crankshaft position sensor resistance
• Disconnect the crankshaft position sensor
coupler from the wire harness.
• Connect the pocket tester (£2 x100) to the
crankshaft position sensor coupler as
shown.
Positive tester probe g white/red 1
Negative tester probe g white/blue2
• Measure the crankshaft position sensor re-
sistance.
SI
Crankshaft position sensor resis-
tance
248 ~ 372 at 20°C(68°F)
(between white/red and white/
blue)
• Is the crankshaft position sensor OK?
4
YES
I
NO
Replace the crankshaft
position sensor/stator
assembly.
EAS00749
• Check the main switch for continuity.
Refer to “CHECKING THE SWITCHES”.
• Is the main switch OK?
YES NO
Replace the main
switch.
8-12
8. Main switch