Service manual

TIGHTENING TORQUES
SPEC 0*
Part to be tightened
Part name
Thread
size
Q
’
ty
Tightening
torque Remarks
Part to be tightened
Part name
Thread
size
Q
’
ty
Nm m»kg
ft»lb
Remarks
Drain bolt(engine oil) - M8 1 23 2.3 16.6
Centerstand spring Hook M6 1 7 0.7 5.1
Starter clutch Nut M22 1 90 9.0 65.1 Left-hand thread
Kickstarter Bolt M6 1 12 1.2 8.7
Primary fixed sheave Nut M10 1 30 3.0 21.7
Clutch housing Nut M10 1 40 4.0 28.9
Stator coil Bolt M5 3 4 0.4 2.9
i
^ILT
Pulser coil Screw M6 2 7 0.7 5.1
AC magneto rotor Nut M12 1 43 4.3 31.1
Starter motor assembly Bolt M6 2 13 1.3 9.4
Ignition coil Bolt M6 2 7 0.7 5.1
Coolant temperature sensor - M12 1 22 2.2 15.9
Cylinder head tightening sequence
(1 -»2-»3-4-»2-»5-»6)
2-20