manual

Pattern Jobs
MOTIF XF Reference Manual
186
Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode
Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
This is the same as in the Song Job mode. See page 163.
This is the same as in the Song Job mode. See page 163.
This Job copies data in the specified measures of a track
for creating Arpeggio data. Up to 16 unique note numbers
can be recorded to the Arpeggio track. If more than 16
different note numbers have been recorded to the MIDI
sequence data, the Convert operation reduces the notes in
excess of the limit. Because of this, be careful to record
only up to 16 different notes when you create an Arpeggio,
especially when using all four tracks.
1 Range
Determines the range which will be converted to the
arpeggio data by specifying the Section (A – P) and
Measure (001 – 256).
Other parameters are the same as in the Song Job mode.
See page 164.
[F6] Pattern Jobs
This Job copies all data from a selected source Pattern to a
selected destination Pattern.
1 Source Pattern
2 Destination Pattern
Determines the source and destination Pattern by selecting
the Pattern number (01 – 64) and Section (A – P, all). If you
set the source Section to “all,” the destination Section is
also set to “all” automatically, with the result that all source
Pattern data is copied to the destination.
3 Copy Pattern Chain
When this box is checkmarked, Pattern Chain data as well
as Pattern data will be copied.
This Job appends one Pattern (1) to the end of another
(2) to create one longer Pattern. Actually, the Phrases
making up the source Pattern (1) will be appended to the
end of the Phrases making up the destination Pattern (2).
This Job is useful if you wish to connect different Patterns
together.
1 Original Pattern
2 Original Pattern and Destination Pattern
Determines the two Patterns to be connected by selecting
the Pattern numbers (01 – 64) and Sections (A – P)
respectively. Executing the Job appends one Pattern (1)
to the end of the other Pattern (2). The result of this Job
will be overwritten to the destination Pattern (2).
05: Normalize Play Effect
06: Divide Drum Track
07: Put Track to Arpeggio
1
01: Copy Pattern
02: Append Pattern
1
3
2
2
1
3