Manualshelf

manual

ManualsBrandsYamaha ManualsSoftwareXF6
221222223224225226227228229230
System Settings (Utility mode, etc.)
MOTIF XF Reference Manual
221
3 Color
Determines the color types commonly for the three modes.
Settings: Red, Pink, Purple, Blue, Aqua, Green, Yellow, White
From this display, you can set parameters for connecting
the MOTIF XF to the network system via the ETHERNET
connector. Make sure to press the [ENTER] button after
setting in this display. If you do not, the settings will not be
stored, even if you press the [STORE] button.
1 Host Name
Determines the Host Name (NetBIOS name) of the MOTIF
XF. This is used when accessing the MOTIF XF from a
computer connected to the network. Set a unique Host
Name that will not conflict with any other computer. In
general, the default Host Name will suffice, so there should
be no need to change this. For detailed instructions on
naming, see page 37.
2 Description
Here, you can input a short summary or memo about your
MOTIF XF. The description input here can be browsed from
the other computer connected to the network. This is useful
when several MOTIF XFs are connected to the same
network. In general, the default Description will suffice, so
there should be no need to change this. For detailed
instructions on inputting a character, see page 37.
3 DHCP Client
Determines whether or not the MOTIF XF is handled as the
client device of the DHCP server. When this is set to “on,”
the MOTIF XF is handled as a client device of the DHCP
server. The DHCP (Dynamic Host Configuration Protocol) is
a standard or protocol by which IP addresses and other
low-level network configuration information can be
dynamically and automatically assigned each time your
MOTIF XF is connected to the network. If the DHCP server
covers the network, set this parameter to “on.” If you wish
to set a specific IP address or there is no DHCP server, set
this parameter to “off.”
Settings: on, off
4 File Server
Determines whether the File Server function of the MOTIF
XF is active or not. When this parameter is set to “on,” the
another computer on the same network can access files on
the USB storage device connected to the USB TO DEVICE
connector of the MOTIF XF.
Settings: on, off
n Make sure to set the Password (%) of this instrument before
setting this parameter to “on.” If this is set to “on” before the
Password is set, “Password is unspecified” appears.
5 IP Address
Determines the IP Address, a string of numbers assigned
to each computer or your MOTIF XF connected to a
network, indicating the device’s location on the network.
When the MOTIF XF is connected to the network which the
DHCP server covers and the DHCP Client parameter
above is set to “on,” this parameter is automatically set,
and you will not need to input it manually. When the DHCP
Client (3) is set to “off” and you do not know how to set this
parameter, consult your network administrator or Internet
provider.
Settings: 0 – 255
6 Subnet Mask
Indicates the Subnet Mask, a setting used to divide a
large-scale network into several smaller networks. When
the MOTIF XF is connected to the network which the DHCP
server covers and the DHCP Client parameter above is set
to “on,” this parameter is automatically set resulting that
you need not input here. When the DHCP Client (3) is set
to “off” and you do not know how to set this parameter,
consult your network administrator or Internet provider.
Settings: 0 – 255
7 Gateway
Determines the Gateway, a system which links different
networks or systems, and makes possible data transfer
and conversion despite differing communications
standards. When the MOTIF XF is connected to the
network which the DHCP server covers and the DHCP
Client parameter above is set to “on,” this parameter is
automatically set, and you will not need to input it manually.
Settings: 0 – 255
8 DNS1 (Domain Name Server1)
9 DNS2 (Domain Name Server2)
Determines the address for the Domain Name server. Up to
two servers (primary DNS1 and secondary DNS2) can be
set. When you do not use the Domain Name server, set
both of the DNS1 and DNS2 to “0.0.0.0.” When you use
only the DNS1, set the DNS2 to “0.0.0.0.” When the MOTIF
XF is connected to the network which the DHCP server
covers and the DHCP Client parameter above is set to
“on,” this parameter is automatically set, and you will not
need to input it manually.
Settings: 0 – 255
Network Settings—[SF3] Network
1
2
3
5
6
7
8
9
^
4
)
!
@
#
$
%