manual

Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode
Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
System Settings (Utility mode, etc.)
MOTIF XF Reference Manual
222
) Security
Determines the certification type when another computer
on the network accesses the MOTIF XF. If you wish to
certificate the computer by using the Account ($) and
password, set this parameter to “workgroup.” If you wish to
certificate the computer by using the domain controller on
the network, set this parameter to “domain.”
Settings: domain, workgroup
! Domain
Enters the Domain name or Workgroup name. Input the
Domain name or Workgroup name to the same name as
that of the online device you wish to use for accessing the
MOTIF XF. For detailed instructions on inputting
characters, see page 37.
@ WINS
Determines the address for the WINS (Windows Internet
Name Service) server. When the PDC Name (#) is set to
the Host name (NetBIOS name), you will set the address of
the WINS server. If you are not using the WINS server, set
this parameter to “0.0.0.0.”
Settings: 0 – 255
# PDC Name (Primary Domain Controller Name)
Determines the Host name (NetBIOS name) of the Domain
Controller or IP address on the network. When the Security
()) is set to “domain,” the certification will be executed by
using the Domain Controller set here.
$ File Server Account
Determines the account name (user name) used when
another computer on the network accesses the MOTIF XF.
For detailed instructions on inputting characters, see
page 37.
n The account is not set by default. When no account is set, the
MOTIF XF can be accessed by the account named “nobody.”
% [SF5] Password
Pressing this button calls up the Password display that lets
you set or change the password necessary for accessing
the MOTIF XF from an online device connected to the
network. When shipped from the factory, the password is
not set. Make sure to set the password if you wish to
access the MOTIF XF from an external computer via the
LAN network.
^ Mount User Name
Determines the User Name necessary for accessing the
computer on the network. By storing this parameter to the
MOTIF XF, the User Name will be shown automatically on
the dialog (page 43) appearing when you log in to the
computer.
From this display, you can set the password of the MOTIF
XF. By using the password set here, external online
devices can access the File mode of the MOTIF XF.
1 Current Password
This column is provided for inputting the current password.
The password can be up to eight characters and no less
than five characters. For detailed instructions on inputting
characters, see page 37. “None” is shown when the
password is not set.
2 New Password
This column is provided for inputting the new password.
The password can be up to eight characters and no less
than five characters. For detailed instructions on inputting
characters, see page 37.
3 Confirm Password
This column is provided for inputting the new password
once again to confirm it. The password can be up to eight
characters and no less than five characters. For detailed
instructions on inputting characters, see page 37.
Password Setting
After inputting the Current Password, New Password and
Confirm Password (New Password), press the [ENTER]
button to set the New Password. If an error occurs, one of
the following error messages will be shown on the display.
Password is invalid.
The password you input to “Current Password” is wrong. Input
the correct password again.
Confirmed password is invalid.
The password you input to “Confirm Password” is not same as
the password you input to “New Password.”
Password is too short.
The password you input to “New Password” is too short. Input
the password again, using five or more characters.
n If you forget the current password, execute the Factory Set
Job (page 231) to reset the password setting, then input the
new password again.
Password Settings
[SF3]  [SF5] Password
1
2
3