manual

File Management (File mode)
MOTIF XF Reference Manual
244
Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode
Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
6 Move the cursor to the desired Voice or Voice
Bank.
The Load menu corresponding to the [SF2] button
appears.
7 Press the [SF2] button (a prompt for
confirmation appears).
Press the [DEC/NO] button to cancel the Load
operation.
8 Press the [INC/YES] button to execute the Load
operation.
NOTICE
The Load operation overwrites any data previously existing in
the destination internal memory. Important data should always
be saved to a USB storage device connected to the USB TO
DEVICE terminal or to a computer connected to the same
network as the MOTIF XF (page 241).
1 Select a device and directory as the source by
following the instructions in “Basic Procedure
in the File mode” on page 238.
2 Set the Type (4) to “waveform.”
Only available files according to the Type are listed in
the Directory/File list box on the display.
n In this step, the Load menu corresponding to the [SF2]
button is not shown in the display. The Load menu appears
when selecting a Waveform to be loaded in step 6.
3 Select the file to be loaded.
You can select any of the files listed in the Directory/File
list box on the display.
4 Press the [ENTER] button so that the three
memory types (USR, FL1 and FL2) are shown
on the display, then move the cursor to the
desired memory type.
5 Press the [ENTER] button so that the
Waveforms in the selected file are listed on the
display.
6 Move the cursor to the desired Waveform.
The Load menu corresponding to the [SF2] button
appears.
7 Specify the destination memory location in the
User memory.
At 5, select a Part to which the Waveform is to be
assigned, when entering the File mode from the
Performance/Song/Pattern mode.
At 6, select an Element (for a Normal Voice) to which
the Waveform (loaded to an empty number) is to be
assigned.
n Please note that Waveforms cannot be loaded to a Drum
Voice.
n When entering the File mode from the Performance/Song/
Pattern mode, determine the Part to which the Voice
including the loaded Waveform is to be assigned.
Loading a specific Waveform from an
“all” or “all waveform” file
Voice List
4
5
6
7
Waveforms