manual

Editing a Drum Voice
MOTIF XF Reference Manual
90
Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode
Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
Amplitude EG
Using the AEG, you can control the transition in volume
from the moment the sound starts to the moment it stops.
Time*
The Time parameters let you set the time between the
adjoining points of the level parameters below. A higher
value results in a longer time until reaching the next level.
Settings: 0 – 127 (0 – 126, hold for Decay 2 Time)
6 Attack Time
Determines how long it takes for the sound to reach full
volume (Attack Level) when a note is pressed.
7 Decay 1 Time
Determines how long it takes for the sound to fall from the
Attack Level to the Decay1 Level after the note is pressed.
8 Decay 2 Time
Determines how quickly the sound decays from the
Decay1 Level to silence after the note is released.
Level*
The Level parameter lets you set the AEG level.
Settings: 0 – 127
9 Decay 1 Level
Determines the level which the AEG level reaches from the
Attack Level after the Decay1 time elapses.
Equalizer (EQ) Settings—[F6] EQ
From this display, you can set the EQ parameters for each
Drum Key.
This is the same as in Normal Voice Common Edit. See
page 83.
0
Level (Volume)
Attack
Level
9
Decay1
Level
Attack
Time
6
Decay1
Time
7
Decay2
Time
8
Pressing the key (Key on) Releasing the key (Key off)
Time