Operator`s manual

E
2-2
1 Engine stop switch lanyard (Cable)
By connecting to the stop switch and opera-
tor will stop the engine If the operator falls
off the vehicle.
2 Engine stop switch
Depress to stop the engine.
3 Lock plate
Insert the lock plate in the engine stop lan-
yard switch to allow the engine to be start-
ed.
Remove the plate to stop the engine or pre-
vent it from starting.
4 Engine stop lanyard switch
Removing the lock plate makes to stop the
engine and disable to start the engine.
5 Starter switch
Depress to start the engine.
6 Oil level warning lamp
7 Throttle lever
Controls the engine speed when accelerat-
ing and decelerate.
8 Drain plugs
Open to drain water in the bilge when the
vehicle is on dry land. Tighten securely
before launching craft.
9 Jet nozzle
Changes the direction of jet thrust according
to handlebar position to steer the vehicle.
ioi
TK0135
u
e
r
t
y
q
w
TK0125