Operator`s manual

EJU00422
PRE-OPERATION CHECKS
CHECK LIST
Before operating this water vehicle, perform the following checks:
w
If any item in the Pre-Operation check is not working properly, have it inspected and
repaired before operating the water vehicle. Otherwise an accident could occur.
3-3
E
ITEM ROUTINE PAGE
Open the front hood and remove the
ENGINE COMPARTMENT compartment, and remove the seats, and 3-4
ventilate the engine compartment.
BILGE
Check, and remove all water and fuel
3-5
residue before launching.
THROTTLE Check for proper throttle operation. 3-7
STEERING Check for proper steering operation. 3-7
FUEL AND OIL
Check fuel and oil level; add as necessary.
3-4
Check for leaks.
BATTERY Check fluid level and charge condition. 3-6
FRONT HOOD Check front hood are secured. 2-5
SEAT
Check that the seats are securely fastened to
2-4
the deck.
HULL/DECK Check the hull and deck for damage or cracks. —
JET (WATER) INTAKE Check that no debris is in the intake. 3-7
FIRE EXTINGUISHER Check readiness of the extinguisher. 3-6
SWITCHES AND LANYARD
Check operation of the starter, stop switch and engine
3-8
stop switch lanyard when the vehicle is in the water.
COOLING WATER PILOT OUTLET
Check that water comes out while the
3-8
engine is running.
NOTE:
Pre-operation checks should be made each time the vehicle is used. This procedure
can be accomplished thoroughly in a short time. The added safety and reliability the
checks assure is worth the time involved.