Operator`s manual

q
w
e
GU2079
E
3) Attach the to the lock plate engine
stop lanyard switch. Also, attach the
lanyard to your left wrist.
1 Engine stop lanyard switch
2 Lanyard
3 Lock plate
w
Check that the lanyard is not frayed or
broken, wrapped around the handlebar,
or tangled in controls. If the operator falls
off, the vehicle could continue to run and
cause an accident.
The operator would also be unable to
rebound the vehicle, which increases the
chance of being hit by another boat and
the risk of exposure.
NOTE:
It is not possible to start the engine with
the lock plate removed from the engine
stop switch.
4) Pull the choke knob all the way out to
start a cold engine.
NOTE:
After the engine has warmed up, push the
choke knob in. The choke should not be
used when the engine is warm.
5) While lightly squeezing the throttle
lever, push the starter switch button.
3-12
GU2080
GU2081