Operator`s manual

4-4
4) Remove the spark plugs and pour
approximately one tablespoon of oil
into each cylinder.
5) Grease the spark plug threads and
reinstall the spark plugs.
6) Lubricate all cables such as the throt-
tle, choke, and steering cables.
NOTE:
Use a Yamaha Power Cable Luber and
Yamaha Lube-Zall to pressure lubricate
the cables and purge out any moisture
between the inner and outer cables.
7) Grease the areas of the water vehicle
specified in “Grease Points” in the
ADJUSTMENT AND MAINTENANCE
section.
E
EJU00528a
FUEL SYSTEM
Top off the fuel tank with fresh fuel/oil
mixture and add one ounce of Yamaha
Fuel Stabilizer and Conditioner to each
gallon of fuel.
NOTE:
Use of Yamaha Fuel Stabilizer and Condi-
tioner eliminates the need to drain the
fuel system. Consult your Yamaha dealer
or other qualified mechanic if the fuel sys-
tem is to be drained instead.