Operator`s manual

2-13
E
EJU00360a
QUICK SHIFT TRIM SYSTEM(Q.S.T.S.)
The trim angle of your water vehicle can be
adjusted by operating the Q.S.T.S.
Operating the trim shifting grip 1 changes
the angle of the jet (output) nozzle at the
stern. The nozzle angle changes the trim
angle of the vehicle to one of five positions.
N
O
TE:
There are two positions A and B for bow
down, neutral “N”, and two positions C and
D for bow up.
Changing the trim angle of the vehicle
1) Set the throttle lever to half open (3,000
r/min) or less.
2) Squeeze and hold the shift lock release
lever 2. Then turn the trim shifting grip
to the desired position.
● Turning the grip to A or B from “N”:
Bow will go down while the vehicle is
on plane.
● Turning the grip to C or D from “N”:
Bow will go up while the vehicle is on
plane.
3) Release the shift lock release lever to
lock the position.
ECJ00049
CAUTION
:
Do not turn the grip while operating the
vehicle at full throttle, otherwise damage
could occur to the Q.S.T.S.
The Neutral (“N”) shift position will provide
good performance for most conditions. To
enhance particular types of performance,
choose the one of the “Bow Down” or “Bow
Up” positions.