Operator`s manual

2-18
E
EJU00698
MULTIFUNCTION METER
This meter contains following functions for
the help and convenience of operation.
1 “MODE” button
2 “SET” button
3 “CODE” setting buttons
4 Tachometer
5 Speedometer
6 Fuel meter
7 Engine oil meter
8 Display for Clock, Hour meter, Trip meter and
Trip timer
9 Warning lamp(LED)
0 Display for PADLOC and direction of warning
indicator
A Battery warning indicator
B Exhaust temperature warning indicator
C Overheat warning indicator
D Fuel warning indicator
E Oil warning indicator
CAUTION
:
● Do not run the engine over 4,000 r/min
to check the meter for operation on
land. The engine could overheat or the
catalytic converter could result in seri-
ous damage.
● Use the specified resistor-type spark
plug and cap, otherwise the meter may
function erratically.
N
O
TE:
The demonstration mode display starts
showing after the engine starts, then all dis-
play light up and the buzzer sounds twice.
The meter will operate normally after few
seconds. The current display will continue to
operate for 30 seconds after the engine
stops.