Operator`s manual

2-25
E
EJU00712
Trip meter
A trip meter is provided for measuring the
approximate traveled distance in miles. To
show the trip meter, press the “MODE” but-
ton until the display shows “TRIP”. After
showing “TRIP”, the display turns to “MILE”.
1) When the display shows “.MILE”, press
the “MODE” button for at least 2 sec-
onds.
2) The buzzer will sound twice. The warn-
ing lamp(LED) and “.MILE” blink for 2
seconds, and “000” is displayed. Now
the meter will start to measure the dis-
tance you will travel.
3) When the trip meter begins measuring
the traveled distance, the “.” to the left of
“MILE” on the display will blink.
N
O
TE:
Measured distance may vary depending on
the water surface conditions, and wind
direction. The measured distance should be
used for a reference.
EJU00716
Fuel warning indicator
If the fuel remaining in the tank drops to
about 17 L (4.5 US gal, 3.7 Imp gal), the fuel
level segment, the fuel warning indicator,
“FUEL” and the warning lamp(LED) begin to
blink. The buzzer also starts sounding inter-
mittently.