Operator`s manual

3-7
E
EJU00447
Throttle
Operate the throttle lever several times to
make sure there is no hesitation in its travel.
It should be smooth over the complete
range, and spring back to the idle position
on its own when released.
EJU00448a
Steering
Make sure the handlebar is not loose. Turn it
full-right and full-left to make sure operation
is smooth and unrestricted throughout the
whole range. Make sure the jet nozzle also
changes directions as the handlebar is
turned, and that there is no free play
between the handlebar and the jet nozzle.
Make sure the tilt lock is secured and there
is no free play.
EJU00450a
Shift
Make sure the reverse gate of the jet pump
goes down to its stopper position when the
shift lever is placed in the “REVERSE” posi-
tion.
Also make sure the reverse gate of the jet
pump goes up to its stopper position when
shift lever is placed in the forward position.