Operator`s manual

4-3
E
EJU00528a
LUBRICATION
WARNING
Do not spray flammable rust inhibitor
products on engine surfaces while the
engine is hot. The sprayed substance or
propellants could catch fire.
1) Remove the spark plugs and pour
approximately one tablespoon of oil into
each cylinder.
2) Grease the spark plug threads and rein-
stall the spark plugs.
3) Crack the engine within 3 seconds using
the starter switch.
4) Lubricate all cables such as the throttle,
choke, and steering cables.
N
O
TE:
Use a Yamaha Power Cable Luber and
Yamaha Lube-Zall to pressure lubricate the
cables and purge out any moisture between
the inner and outer cables.
5) Grease the areas of the water vehicle
specified in “Grease Points” in the
ADJUSTMENT AND MAINTENANCE
section.