User Manual
Table Of Contents
- Cover
- What is Amp Editor?
- Special Notices
- Contents
- Preparing for operation
- An overview of Amp Editor
- Setup
- Basic operations in Amp Editor
- Main panel window
- Objects in the window and their function
- Menus in the main panel window
- Preferences
- Event Log
- Device Information
- Scene Manager
- Alert Setup
- Word Clock (TXn only)
- Speaker Processor Library Manager (TXn only)
- Clock
- Language (TXn only)
- GPI (ACD1 only)
- Utility
- IP Address
- IP Control Port No.
- Firmware Update (Updating the internal firmware)
- Scene Link Manager (for devices other than XMV)
- Network Setup
- Synchronization (Synchronization with devices)
- Custom Control Panel Manager
- System View Creator
- Speaker Processor Library Converter
- Tree View window
- Detail View window
- Device Properties window
- Signal Path View window (TXn only)
- Component editor (TXn only)
- Custom control panels
- Appendix
Chapter 2 An overview of Amp Editor
Amp Editor Owner’s Manual
12
Projects
A system constructed by Amp Editor is saved in a folder as a “project.”
A project contains settings for workspace, components, and parameters.
Only one project can be opened at a time; when you open a different project, the currently-open project will be
closed.
The commands for opening, creating, or saving a project are found on the [File] menu of the main panel window.
Creating a new project
Here’s how to create a new project.
1. In the main panel window, click [File] menu [Name].
The currently-open project will be closed when you create a new project, so a dialog box will ask whether
you want to save the current project.
2. Click [Yes] if you want to save the project, or [No] if you don’t want to save it.
If you click [Yes], the “Project Save As” dialog box will appear if the project has never been saved
before. Enter the name under which you want to save the project, and click the [OK] button. In the folder
selection dialog box that will then appear, select or create the folder in which to save the project, and click
the [OK] button.
The new project will be created.
Saving a project
In Amp Editor, projects are saved in units of folders.
To save a project, use the main panel window [File] menu [Save] or [Save As...] command. The [Save] command
will overwrite the previously-saved version of the project. The [Save As...] command will save the project under
a different name.