User Manual

Chapter 4 Basic operations in Amp Editor

Amp Editor Owner’s Manual

3. Use the Direction field to specify the direction of synchronization, and then click the [Go

Online] button.

Amp Editor and the devices will synchronize, and the indication in the main panel window will change to

[ONLINE].

• If you choose [Amp Editor  Device], synchronization will occur by sending data from Amp Edi-

tor to the devices. In this case, please take care that unexpected high volume does not damage

your speakers or cause hearing damage.

When you switch to [ONLINE], the amplifier icons shown in the workspace of the Tree View window

will turn green.

• If synchronization with the devices is not possible due to a network problem, information about the

devices that were unable to synchronize will be displayed. Check the network cable connections, and

try again from step 2 of the procedure.

• If the Amp Editor does not recognize the synchronized devices, a dialog box which indicates the devices

that were unable to be recognized will appear.

NOTE