User Manual

MTX3/MTX5-D/XMV Series/EXi8/EXo8 Remote Control Protocol Specications V1.0.3
14
3. Command Specications
3.3.2. Device run mode query
2-5) Emergency run mode change
Command Option 1 Description
devmode normal Sets the run mode to normal
emergency Sets the run mode to emergency
Response
Response string Description
OK devmode normal Normal run mode change complete
OK devmode emergency Emergency run mode change complete
Example: Command: devmode emergency
Response: OK devmode emergency
Meaning: Change to emergency mode.
Run mode was changed to emergency.
3.3.3. MTX external control protocol run mode setting
2-6) Result and change notication character encoding setting
Command Option 1 Option 2 Description
scpmode encoding ascii ASCII encoding mode (default setting)
utf8 UTF-8 encoding mode
Response
Response string Description
OK scpmode encoding ascii ASCII encoding mode change complete
OK scpmode encoding utf8 UTF-8 encoding mode change complete
Example: Command: scpmode encoding utf8
Response: OK scpmode encoding utf8
Meaning: Change the result and change notication encoding code to UTF-8.
The encoding mode was changed to UTF-8.
2-7) Value notication mode setting
Command Option 1 Option 2 Description
scpmode valuetype raw Raw value mode (default setting)
normalized Normalized value mode
Response
Response string Description
OK scpmode valuetype raw Raw value mode change complete
OK scpmode valuetype normalized Normalized value mode change complete
Example: Command: scpmode valuetype normalized
Response: OK scpmode valuetype normalized
Meaning: Change parameter change notications to normalized value mode.
Parameter change notications were changed to normalized value mode.