User Manual

MTX3/MTX5-D/XMV Series/EXi8/EXo8 Remote Control Protocol Specications V1.0.3
5
2. Command List
1. Commands from a device sent to a remote controller
No. Request details Reply from device Remarks
1-1 Device status change
notication
Device run mode notication NOTIFY devstatus runmode ... "emergency" is invalid on the XMV, EXi8 and EXo8.
1-2 Device error status notication NOTIFY devstatus error ...
1-3 Current Fs (sampling frequency) setting
notication
NOTIFY devstatus fs ...
1-4 Current word clock status notication NOTIFY devstatus lockstatus ...
1-5 Parameter change
notication
Parameter change notication raw value NOTIFY set ...
Parameter change notication normalized value NOTIFY setn ...
1-6 Scheduler on/off change notication NOTIFY set(setn) MTX:EvntScd_On ...
1-7 Meter change notication Meter information notication NOTIFY mtr ...
1-8 Current snapshot (preset)
number change notication
Current snapshot (preset) number change
notication
NOTIFY sscurrent ...
1-9 Event processing change
notication
Media insertion notication NOTIFY event MTX:Media ... This command is invalid on the XMV, EXi8 and EXo8.
1-10 Time synchronization notication <old format> NOTIFY event MTX:AbsoluteTime ... This command is invalid on the EXi8 and EXo8.
1-11 Time synchronization notication <new format> NOTIFY event MTX:SetAbsoluteTime… This command is invalid on the EXi8 and EXo8.
1-12 DST enable change notication NOTIFY event MTX:DSTSetEnable… This command is invalid on the XMV, EXi8 and EXo8.
1-13 DST offset time change notication NOTIFY event MTX:DSTSetOffset… This command is invalid on the XMV, EXi8 and EXo8.
1-14 DST start time change notication NOTIFY event MTX:DSTSetStartTime… This command is invalid on the XMV, EXi8 and EXo8.
1-15 DST end time change notication NOTIFY event MTX:DSTSetEndTime… This command is invalid on the XMV, EXi8 and EXo8.
1-16 DST start/end day change notication (day/week) NOTIFY event MTX:DSTSetDayWeek… This command is invalid on the XMV, EXi8 and EXo8.
1-17 DST start/end day change notication (day) NOTIFY event MTX:DSTSetDay… This command is invalid on the XMV, EXi8 and EXo8.
1-18 Song play mode notication NOTIFY event MTX:
AudioPlayerSetPlayMode ...
This command is invalid on the XMV, EXi8 and EXo8.
1-19 Play, stop, and other transport operation
notication
NOTIFY event MTX:
AudioPlayerTransport ...
This command is invalid on the XMV, EXi8 and EXo8.
1-20 Playback song notication NOTIFY event MTX:
AudioPlayerSetCurrentSong ...
This command is invalid on the XMV, EXi8 and EXo8.
1-21 MTX Editor synchronization processing
notication
NOTIFY event MTX:
SynchronizationSetStatus ...
This command is invalid on the XMV, EXi8 and EXo8.
2. Commands for controlling a device
No. Request details Command string Remarks
2-1 Device status query Device run mode query devstatus runmode "emergency" is invalid on the XMV, EXi8 and EXo8.
2-2 Device error status query devstatus error
2-3 Current Fs (sampling frequency) status query devstatus fs
2-4 Current word clock status query devstatus lockstatus
2-5 Device run mode change Normal run mode change devmode normal
Emergency run mode change devmode emergency This command is invalid on the XMV, EXi8 and EXo8.
2-6 MTX external control
protocol run mode setting
Result and change notication character
encoding setting
scpmode encoding ...
2-7 Value notication mode setting scpmode valuetype ...
2-8 Normalization resolution setting scpmode resolution ...
2-9 Keepalive activation setting scpmode keepalive ...
2-10 Parameter query Raw value parameter query get ...
2-11 Normalized value parameter query getn ...
2-12 Scheduler status notication get(getn,gett) MTX:EvntScd_On ... This command is invalid on the XMV, EXi8 and EXo8.
2-13 Parameter setting Raw value parameter setting set ...
2-14 Normalized value parameter setting setn ...
2-15 Scheduler setting set(setn,sett) MTX:EvntScd_On ... This command is invalid on the XMV, EXi8 and EXo8.
2-16 Meter control Transmission request mtrstart ...
2-17 Stop request mtrstop ...
2-18 Snapshot (preset)
processing
Snapshot (preset) current number query sscurrent ... This command is invalid on the XMV, EXi8 and EXo8.
2-19 Snapshot (preset) recall processing ssrecall ... This command is invalid on the XMV, EXi8 and EXo8.