User Manual

MTX3/MTX5-D/XMV Series/EXi8/EXo8 Remote Control Protocol Specications V1.0.3
71
7. Parameter List
XMV Series
Model Access ID
Prarameter Name MIN MAX unit Remarks
4ch 8ch 4ch D 8ch D
MemNo
(Memory
Number)
UniqueId
ElmNo
(Element
Number)
Xpos
(X Position)
Ypos
(Y Position)
PrmNo
(Parameter
Number)
IndexNo
(Index
Number)
o o 512 1 4 0 to 3 0 0 0 Signal
Processing
ATT *2 -99 0 dB Synchronized with
DigitalATT
o o 0 to 7
o o 0 to 3 0 1 0 Digital
ATT *2
-99 0 dB Synchronized with
ATT
o o 0 to 7
o o 0 to 3 0 2 0 Mute OFF ON - 0:OFF
1:ON
o o 0 to 7
o o 0 to 3 0 3 0 Polarity Normal Inverse - 0:Normal
1:Inverse
o o 0 to 7
o o o o
6 0 0 0 0 Power Standby Standby ON - 0:ON
1:Standby
o o o o
7 0 0 0 0 Utility Input
Select *1
Analog Digital - 0:Analog
1:Digital
o o
2 0 0 to 3 0 0 0 ChannelName Channel
Name 4
Channel
ChName Name Character (UTF-8)
48byte
-
o o
0 to 7 0 0 0 Channel
Name 8
Channel
*1 : Note
The XMV’s input sensitivity is -3dBFS (rated output at -3dBFS) when connected via digital (YDIF or Dante) and +4dBu (rated output at
+4dBu) when connected via analog.
Please set an appropriate level before switching input.
*2 : The ATT and DigitalATT parameters are always synchronized internally within an XMV amplier.
Controlling either one will provide the same result.
< XMV Block Diagram > e.g. XMV4280/XMV4140/XMV4280-D/XMV4140-D
In
ATT
Dante
XMV4280-D/XMV4140-D only
DANTE
MODULE
SECONDARY
PRIMARY
Out
ATT
ATT
INPUT MIX
Input:
Analog: 4
YDIF: 4
(XMV4280/
XMV4140
only)
Dante: 4
(XMV4280-D/
XMV4140-D
only)
Output: 4
YDIF
XMV4280/XMV4140 only
HA
CH A, B, C, D
G
+
-
AD
ATT
DigitalATT