User Manual

13.2.2. "Properties" area
This area enables you to view and edit the information on the DME7.
• Device
◦ Capacity
Specifies the signal processing capacity of the DME7. Select from 64, 128, 192, and 256.
This capacity must match that of the DME7 unit.
The factory default setting for the capacity of the DME7 unit is 64. If the capacity is 64, the
maximum number of available inputs and outputs for Dante, and for Matrix Mixer and Router
components, is 64-in/64-out.
You can increase this signal processing capacity by adding the Device License (DEK-DME7-DX64)
to the unit.
Each time you add a license, the number of inputs and outputs for Dante, and for Matrix Mixer and
Router components, will increase by 64 channels.
You can add up to three licenses. Refer to the “Device License Activation Guide” for more
information on how to add a license to the device.
◦ Sampling Frequency
Specifies the sampling rate for the device. Select from 44.1kHz, 48kHz, 88.2kHz, and 96kHz.
This rate must match the sampling rate for Dante.
◦ Unit ID
This value must match the Unit ID for the DME7 unit. The factory default setting is 1.
13. Audio Processors : DME7
114 | ProVisionaire Design User Guide