User Manual

17.3. Tuning Sheet
17.3.1. Link group editor
This appears when you double-click a link group on the "Tuning" sheet in which a channel of a XMV-series unit is
registered, or when you right-click and choose [Open Link Group Editor].
17.3.2. "ATT"
Here you can make collective adjustments to the attenuator of the channels registered in the group.
Use the Main fader to control the attenuator.
The "LINK MAIN" main fader collectively applies a relative adjustment to the attenuator of the channels
registered in the group.
For details on the attenuator, refer to "Power/ATT/Polarity" component editor.
•
ATT list box
Lists the amps that are registered in the group.
•
Channel index
The channel index of the device.
17.3.3. "LINK MAIN"
Applies a relative adjustment to the attenuators within the link group.
•
[AMP PROTECT] indicator
This will light if the protection function of the XMV unit itself is operating.
•
[AMP LIMIT] indicator
This will light if the limiter of the XMV unit itself is operating.
•
Main fader
Applies a relative adjustment to the attenuators within the link group. The adjustable range is shown
above and below in gray.
When you right-click the fader and choose [Match Values], the members of the link group are set to the
same attenuator value.
•
button
Raises the main fader by 3 dB.
•
button
Raises the main fader by 1 dB.
17. Power Amplifiers : XMV-series
274 | ProVisionaire Design User Guide