User Manual

3-5) Serial number query
devinfo serialno Queries the serial number
Response
OK devinfo serialno "xxxx" Serial number
Details: xxxx = Serial number
Example: Command: devinfo serialno
Notification: OK devinfo serialno "ZA37640CHNET101001"
Meaning: Query the serial number.
Serial number = "ZA37640CHNET101001"
3-6) Device ID query
devinfo deviceid Queries the device ID
Response
OK devinfo deviceid "xxxx" Device ID
Details: xxxx = Device ID
* 3-digit hexadecimal
Example: Command: devinfo deviceid
Notification: OK devinfo deviceid "001"
Meaning: Query the device ID.
Device ID = "001"
Note: The device ID corresponds to the UNIT ID.
3-7) Device name query
devinfo devicename Queries the device name assigned by the user
Response
OK devinfo devicename "xxxx" Device name assigned by the user
Details: xxxx = Device name
Example: Command: devinfo devicename
Notification: OK devinfo devicename "MTX3"
Meaning: Query the device name.
Device name = "MTX3"
Note: The character encoding for the device name conforms to the setting specified by the scpmode encoding command.
3.4.2. Snapshot (preset) list recall processing
devinfo: queries the device status
3-8) Number of snapshot (preset) lists
ssnum Queries the number of preset lists
Response
OK ssnum (num) The number of preset lists
Details: (num) = Quantity
Example: Command: ssnum
Notification: OK ssnum 51
Meaning: Query the number of presets.
The number of presets is 51.
3-9) Nth preset information
ssinfo (index) Queries the preset information at the specified index in the preset list.
Response
OK ssinfo (index) "xxxxxx" (attrib) "yyyyyy" "zzzzzz" Preset information at the specified index in the preset list.
Details: (index) = Requested index number
"xxxxxxx" = Text expressing the relevant preset number
(attrib) = Relevant preset attribute
preinst = preinstalled preset
reserve = reserved area
user = user preset available
empty = empty
"yyyyyyy" = = title text of the relevant preset
"zzzzzz" = comment text of the relevant preset. *MTX does not use, always as "".
Example: Command: ssinfo 10
Notification: OK ssinfo 10 "10" user "Preset 10" ""
Meaning: Query the contents of the preset at index 10 (preset 10).
The preset at index 10 contains
display number = "10"
title = "Preset 10"
comment = ""
and is a stored preset.
Note: The character encoding for preset titles and comments conforms to the setting specified by the scpmode encoding command.
Description
Description
Description
Description
DescriptionResponse string
Description
Option 1
Description
Command
Command
Response string
Response string
Option 1
Description
Option 1
Command
Response string
Response string
Command
Description
Option 1
DescriptionCommand
MTX3/MTX5-D/XMV Series/EXi8/EXo8 Remote Control Protocol Specifications V1.0.1
12