User Manual

MTX3/MTX5-D/MRX7-D/XMV Series/EXi8/EXo8 Remote Control Protocol Specications V3.3.0 rev12
5
0. Revision History
Version Date Section Description
V2.2.0 Jun. 21, 2016 6 Added "B/W(Q)" parameter for PEQ in MRX7-D part
6 Added "Paging Ducker", "Effect" and "Pitch Shift FBS" parameters in MRX7-D part
6 Added "B/W(Q)" parameter for Speaker Processor PEQ in MRX7-D part
7 Fixed Remarks for "GAIN/HPF" of "MIC/LINE INPUT MONO CH STRIP 1-8(16)" in "INPUT
CHANNEL" category in MTX3/MTX5-D part
7 Changed parameter name "DCA Fader 8(16) Channel" to "Fader 8(16) Channel" for "INPUT
CHANNEL LEVEL" in MTX3/MTX5-D part
7 Changed parameter name "DCA Fader 6 Channel" to "Fader 6 Channel" for "INPUT CHANNEL
LEVEL" in MTX3/MTX5-D part
7 Changed parameter name "DCA Mute 6 Channel" to "Mute 6 Channel" for "INPUT CHANNEL
MUTE" in MTX3/MTX5-D part
7 Changed parameter name "DCA Fader 8 Channel" to "Fader 8 Channel" for "INPUT CHANNEL
LEVEL" in MTX3/MTX5-D part
7 Changed parameter name "DCA Mute 8 Channel" to "Mute 8 Channel" for "INPUT CHANNEL
MUTE" in MTX3/MTX5-D part
7 Added "INPUT CHANNEL DCA" and "INPUT CHANNEL MUTE" categories in MTX3/MTX5-D part
7 Deleted duplicated "INPUT CHANNEL DCA / MUTE" parameters between "MIC/LINE INPUT MONO
CH STRIP 1-8(16)" and "LINE INPUT ST/MONO CH STRIP 1L-3R" in MTX3/MTX5-D part
7 Merged "ZONE DCA/MUTE" parameters into "ZONE" category in MTX3/MTX5-D part
7 Added "DCA Mute 8(16) Channel" for Zone in MTX3/MTX5-D part
7 Changed parameter name "DCA Fader 8(16) Channel" to "Fader 8(16) Channel" for "MATRIX
OUTPUT MASTER" in MTX3/MTX5-D part
7 Added "Paging Ducker" parameters for Dynamics in MRX7-D part
7 Added "Effect" parameters in MRX7-D part
7 Added "Notch FBS" parameters and "Pitch Shift FBS" parameters in MRX7-D part
7 Added "Delay Matrix" parameters for Mixer in MRX7-D part
8 Added "Paging Ducker" parameters for Dynamics in MRX7-D part
8 Added "Delay Matrix" parameters for Mixer in MRX7-D part