User Manual

Chapter 10 Component editor (TXn only)
Amp Editor Owner’s Manual
150
 Graph
Parameters are shown in graphical form. When you edit a parameter, the graph will change shape.
If the graph has control points, you can edit the parameters by dragging the control points. If a control point’s
movement is constrained to a vertical or horizontal direction, the mouse cursor will change to a bi-directional
arrow when you place the mouse cursor on the control point and hold down the mouse button. Drag in the
direction of the arrow to edit the parameter.
If a control point’s movement is not constrained in direction, its position will normally be determined by mul-
tiple parameters of the component editor. Multiple parameters will change depending on the direction in
which you drag.
If a graph contains multiple control points, they will be categorized by color. The value shown below the cor-
responding knob or edit box will be the same color as the control point.
• Even if you copy a graph containing control points to a custom control panel, the control points will
not be displayed. If you want the control points to be displayed, you must also copy the controls of
the corresponding parameters.
Mouse
cursor
Control point
NOTE