Operation Manual

FEATURES
1-2
EAS20170
FEATURES
EAS4B51038
OUTLINE OF FI SYSTEM
The main function of a fuel supply system is to provide fuel to the combustion chamber at the opti-
mum air-fuel ratio in accordance with the engine operating conditions. In a conventional carburetor
system, the air-fuel ratio of the mixture that is supplied to the combustion chamber is created by the
volume of the intake air and the fuel that is metered by the jet used in the respective chamber.
Despite the same volume of intake air, the fuel volume requirement varies with the engine operating
conditions, such as acceleration, deceleration, or operation under a heavy load. Carburetors that
meter the fuel through the use of jets have been provided with various auxiliary devices, so that an
optimum air-fuel ratio can be achieved to accommodate the constant changes in the operating con-
ditions of the engine.
As the requirements for engines to deliver more performance and cleaner exhaust gases increase, it
becomes necessary to control the air-fuel ratio in a more precise and finely tuned manner. To
accommodate this need, this model has adopted an electronically controlled fuel injection (FI) sys-
tem in place of a conventional carburetor system. This system can achieve an optimum air-fuel ratio
required by the engine at all times by using a microprocessor that regulates the fuel injection volume
according to the engine operating conditions detected by various sensors.
Adoption of the FI system has resulted in a highly precise fuel supply, improved engine response,
better fuel economy, and reduced exhaust emissions.
1. Fuel injector
2. Intake air temperature sensor
3. Lean angle sensor
4. ECU (engine control unit)
5. Engine trouble warning light
6. Battery
7. Intake air pressure sensor
8. Fuel hose
9. O
2
sensor
10.Fuel pump
11.Crankshaft position sensor
12.Fuel tank
13.Coolant temperature sensor
14.Throttle position sensor
15.Spark plug
16.Ignition coil
17.Front wheel sensor