Operation Manual

FEATURES
1-5
5. Push the left set button and then release it
to start the clock.
Odometer and tripmeter modes
Pushing the left set button switches the display
between the odometer mode and the tripmeter
modes in the following order:
Odo → Tr i p 1 → Tr i p 2 → V-Belt Trip → Oil Trip
→ Odo
When approximately 3.0 L (0.79 US gal, 0.66
Imp.gal) of fuel remains in the fuel tank, the
display will automatically change to the fuel
reserve tripmeter mode “Trip F” and start
counting the distance traveled from that point.
In that case, pushing the left set button
switches the display between the various
tripmeter and odometer modes in the following
order:
Odo → Tr i p 1 → Tr ip 2 → Tr i p F → V-Belt Trip
→ Oil Trip → Odo
To reset a tripmeter, select it by pushing the left
set button until “Trip F”, “Trip 1” or “Trip 2” is
displayed. While “Trip F”, “Trip 1” or “Trip 2” is
displayed, push the left set button for at least
one second. If you do not reset the fuel reserve
tripmeter manually, it will reset itself automati-
cally and the display will return to the prior
mode after refueling and traveling 5 km (3 mi).
Fuel meter
With the key in the “ON” position, the fuel
meter indicates the amount of fuel in the fuel
tank. The display segments of the fuel meter
disappear towards “E” (Empty) as the fuel level
decreases. When the fuel level reaches the
bottom segment near “E”, the fuel level warn-
ing indicator, “F”, “E”, and the bottom segment
will flash. Refuel as soon as possible.
Coolant temperature meter
With the key in the “ON” position, the coolant
temperature meter indicates the temperature
of the coolant. The coolant temperature varies
with changes in the weather and engine load.
If the top segment, “H”, “C”, and coolant tem-
perature warning indicator flash, stop the vehi-
cle and let the engine cool.
1. Odometer/tripmeters/fuel reserve tripmeter
1. Oil change tripmeter
1. V-belt replacement tripmeter
1. Fuel reserve tripmeter